소개

Remove the glass panel to gain access to your iMac's internals.

부품

부품은 필요하지 않습니다.

    • The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.

    • Stick two suction cups to opposing corners of the glass panel.

    • To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

    • If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent such as Windex.

  1. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  2. Gently pull the glass panel straight up off the iMac.
    • Gently pull the glass panel straight up off the iMac.

    • The glass panel has several positioning pins around its perimeter. To avoid shearing these pins off the glass panel, be sure to only pull straight up during removal.

    • Be meticulous about cleaning the LCD and the inside face of the glass panel before reinstallation, as any fingerprints or dust trapped inside will be annoyingly visible when the display is on.

결론

To reassemble your device, follow these instructions in reverse order.

다른 25명이 해당 안내서를 완성하였습니다.

Brittany McCrigler

회원 가입일: 2012년 03월 05일

80,985 평판

안내서 132개 작성하였습니다

iFixit iFixit 회원

Community

102 회원들

안내서 7,926개 작성하였습니다

조회 통계:

지난 24시간: 2

지난 7일: 14

지난 30일: 54

전체 시간: 15,004