주요 콘텐츠로 건너뛰기

소개

Pre-req only

부품

지정된 부품이 없습니다.

  1. Peel off the tape holding the optical drive in place. Remove the two 7.1 mm T10 torx screws.
    • Peel off the tape holding the optical drive in place.

    • Remove the two 7.1 mm T10 torx screws.

  2. Firmly grab the optical drive connector and pull it straight out of the optical drive. Remove the optical drive from the device. Remove the optical drive from the device.
    • Firmly grab the optical drive connector and pull it straight out of the optical drive.

    • Remove the optical drive from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Brittany McCrigler

회원 가입일: 2012년 03월 05일

82,685 평판

안내서 132개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 532