주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement, Optical Drive: 1 단계, 이미지 1/1
    • Remove the four T10 Torx screws securing the optical drive to the outer case.

  2. iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement: 2 단계, 이미지 1/1
    • Pull the optical drive thermal sensor connector straight away from its socket on the logic board.

  3. iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement: 3 단계, 이미지 1/2 iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement: 3 단계, 이미지 2/2
    • Insert a spudger between the optical drive connector and the optical drive.

    • Twist the spudger to slightly separate the optical drive connector from the optical drive, then use your fingers to pull the connector away from the drive.

  4. iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement: 4 단계, 이미지 1/1
    • Lift the left edge of the optical drive slightly and pull it away from the right side of the outer case.

    • During reassembly, note that there are two holes in the optical drive face plate into which two stubby plastic posts must engage for proper positioning.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

694,561 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,139