기기를 수리하세요 커뮤니티 상점

iON SnapCam 1045 Wearable HD Video Camera Battery

소개

This guide covers the disassembly of the iON SnapCam 1045 battery.

필요한 것

  1. iON SnapCam 1045 Wearable HD Video Camera Battery, Battery: 1 단계, 이미지 1/1

    • Detach the magnetic clip from the bottom of the camera.

    • The magnetic clip gets in the way of disassembly because it constantly spins and therefore a distraction so it is imperative to detach.

    편집

  2. iON SnapCam 1045 Wearable HD Video Camera Battery: 2 단계, 이미지 1/1

    • Use a spudger to gently detach the memory card and USB slot cover.

    편집

  4. iON SnapCam 1045 Wearable HD Video Camera Battery: 3 단계, 이미지 1/1

    • Use a Phillips #000 Screwdriver to loosen the 0.008 mm screw located between the USB and memory card slots.

    • This screw is really tiny and can easily fall off and get lost! Make use of a magnetic mat to hold it in place or better still put the magnetic clip to use for keeping the screw safe.

    편집

  5. iON SnapCam 1045 Wearable HD Video Camera Battery: 4 단계, 이미지 1/2 iON SnapCam 1045 Wearable HD Video Camera Battery: 4 단계, 이미지 2/2

    • Once again use the spudger to gently open the encasement.

    • The case is a little fragile and forceful entry could lead to damage of the plastic case. Thread carefully.

    • The Battery can be safely detached and replaced.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Olakunle

회원 가입일: 11/11/17

102 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

IUPUI, Team S3-G3, Wilson Fall 2017 IUPUI, Team S3-G3, Wilson Fall 2017 회원

IUPUI-WILSON-F17S3G3

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 4

전체 시간: 691