기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

iPad 2 GSM Headphone Jack Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Prerequisite only.

필요한 것

  1. iPad 2 GSM Headphone Jack Assembly Replacement, Headphone Jack Assembly: 1 단계, 이미지 1/3 iPad 2 GSM Headphone Jack Assembly Replacement, Headphone Jack Assembly: 1 단계, 이미지 2/3 iPad 2 GSM Headphone Jack Assembly Replacement, Headphone Jack Assembly: 1 단계, 이미지 3/3

    • Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Run a plastic opening tool underneath the headphone jack and front-facing camera cable to free it from the adhesive attaching the cable to the rear panel.

    • Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board.

    번역하기

  2. iPad 2 GSM Headphone Jack Assembly Replacement: 2 단계, 이미지 1/1

    • Remove the three 2 mm Phillips screws securing the SIM slot to the rear panel.

    번역하기

  3. iPad 2 GSM Headphone Jack Assembly Replacement: 3 단계, 이미지 1/1

    • Remove the two 2.9 mm Phillips screws securing the headphone jack to the rear panel.

    번역하기

  5. iPad 2 GSM Headphone Jack Assembly Replacement: 4 단계, 이미지 1/1

    • Use a plastic opening tool to help pull the headphone jack away from its recess in the top edge of the iPad.

    • Don't try to remove the assembly just yet.

    번역하기

  6. iPad 2 GSM Headphone Jack Assembly Replacement: 5 단계, 이미지 1/1

    • Carefully peel the front camera and microphone cables off the rear panel.

    번역하기

  7. iPad 2 GSM Headphone Jack Assembly Replacement: 6 단계, 이미지 1/2 iPad 2 GSM Headphone Jack Assembly Replacement: 6 단계, 이미지 2/2

    • Carefully remove the strip of tape covering the front camera cable connector.

    • Use the edge of a plastic opening tool to disconnect the front camera cable from the headphone jack cable.

    번역하기

  8. iPad 2 GSM Headphone Jack Assembly Replacement: 7 단계, 이미지 1/1

    • Carefully peel the front camera cable off the bottom ribbon cable attached to the headphone jack.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Walter Galan

694,573 평판

안내서 1,203개 작성하였습니다

배지: 54

배지 +51개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 807