주요 콘텐츠로 건너뛰기

소개

Internal Prereq. Removing Wi-Fi with battery removed

부품

지정된 부품이 없습니다.

  1. Remove the following screws securing the Wi-Fi antenna to the aluminum frame.
    • Remove the following screws securing the Wi-Fi antenna to the aluminum frame.

    • Two 1.75 mm Phillips #00 (small head)

    • One 4.15 mm Phillips #00

    • One 1.8 mm Phillips #00 (wide head)

  2. Use the flat end of a spudger to loosen the foam adhesive holding the Wi-FI antenna to the speaker assembly. Use the flat end of a spudger to loosen the foam adhesive holding the Wi-FI antenna to the speaker assembly.
    • Use the flat end of a spudger to loosen the foam adhesive holding the Wi-FI antenna to the speaker assembly.

  3. Firmly grasp the Wi-Fi antenna and speaker cable together. Carefully, pull the cables off of the aluminum frame.
    • Firmly grasp the Wi-Fi antenna and speaker cable together.

    • Carefully, pull the cables off of the aluminum frame.

  4. Separate the speaker cable from the Wi-Fi antenna cable. Remove the Wi-Fi cable from the iPad. Remove the Wi-Fi cable from the iPad.
    • Separate the speaker cable from the Wi-Fi antenna cable.

    • Remove the Wi-Fi cable from the iPad.

결론

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

회원 가입일: 2010년 04월 12일

121,761 평판

안내서 143개 작성하였습니다

iFixit iFixit 회원

Community

137 회원들

안내서 16,682개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 80