주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

iPad 3 Wi-Fi Power & Volume Button Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement, Power & Volume Button Assembly: 1 단계, 이미지 1/1
    • Remove the following screws securing the power & volume button cable to the aluminum frame:

    • Two 5.5mm Phillips #0

    • One 2.6 mm Phillips #0

    • Two 2.6 mm Phillips #0

    • These screws are angled into the aluminum frame. Be sure to always hold the screwdriver in line with the screw.

  2. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 2 단계, 이미지 1/1
    • Remove the piece of plastic covering the volume buttons.

  3. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 3 단계, 이미지 1/1
    • Remove the single 2.6 mm Phillips #00 screw holding the volume button frame to the aluminum frame.

    • This screw is angled into the aluminum frame. Be sure to always hold the screwdriver in line with the screw.

  4. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 4 단계, 이미지 1/2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 4 단계, 이미지 2/2
    • Wedge the edge of a plastic opening tool underneath the sleep/wake sensor, being careful to not damage the fragile cable.

    • Move the plastic opening tool around the sensor, releasing the adhesive.

  5. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 5 단계, 이미지 1/2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 5 단계, 이미지 2/2
    • Continue sliding the plastic opening tool underneath the power & volume cables, releasing the adhesive.

  6. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 6 단계, 이미지 1/2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 6 단계, 이미지 2/2
    • Using the tip of a spudger, release the adhesive underneath the volume button branch of the ribbon cable.

  7. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 7 단계, 이미지 1/2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 7 단계, 이미지 2/2
    • Continue sliding the tip of the spudger toward the top of the iPad, releasing the adhesive.

  8. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 8 단계, 이미지 1/3 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 8 단계, 이미지 2/3 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 8 단계, 이미지 3/3
    • With the tip of the spudger still underneath the ribbon cable, gently lift the power button out of its socket in the aluminum frame.

  9. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 9 단계, 이미지 1/2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 9 단계, 이미지 2/2
    • Holding the power & volume button cable with with both hands, carefully pull the volume buttons and lock switch from their sockets in the aluminum frame.

    • Lift and remove the power & volume button cable out of the rear aluminum case.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

693,936 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 106