주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

iPad 4 Wi-Fi Headphone Jack Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iPad 4 Wi-Fi Headphone Jack Assembly Replacement, Headphone Jack Assembly: 1 단계, 이미지 1/1
    • Carefully move, but do not remove the front-facing camera ribbon cable aside with the flat edge of a spudger.

  2. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 2 단계, 이미지 1/2 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 2 단계, 이미지 2/2
    • Peel back and remove the adhesive tape covering the headphone jack assembly.

  3. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 3 단계, 이미지 1/1
    • Using the tip of the spudger, flip up the retaining flap on the microphone cable ZIF connector.

  4. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 4 단계, 이미지 1/2 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 4 단계, 이미지 2/2
    • Insert the tip of the spudger underneath the microphone ribbon cable and carefully push it out from its socket on the ZIF connector.

    • Use the flat edge of a spudger to move the microphone ribbon cable aside.

  5. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 5 단계, 이미지 1/1
    • Flip up the retaining flap securing the volume/power button ribbon cable connector to the headphone jack assembly board.

  6. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 6 단계, 이미지 1/2 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 6 단계, 이미지 2/2
    • Push the volume button ribbon cable from its ZIF connector.

    • Gently bend the volume button ribbon cable upwards to move it aside.

  7. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 7 단계, 이미지 1/3 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 7 단계, 이미지 2/3 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 7 단계, 이미지 3/3
    • Remove the following screws from the headphone jack assembly:

    • Five 2.6 mm Phillips #0

    • Two 2.2 mm Wide Head Phillips #00

    • Two 2.6 mm Phillips #00

    • These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid stripping the screw.

  8. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 8 단계, 이미지 1/1
    • Holding onto the ribbon cable of the headphone jack assembly, carefully pull the assembly upwards towards the top of the device.

  9. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 9 단계, 이미지 1/2 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 9 단계, 이미지 2/2
    • Grasping the headphone jack assembly with one hand, pull the assembly from the iPad, minding any cables that may get caught.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

693,936 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 38