이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the following screws securing the upper component cable bracket:
-
Two 2.0 mm Phillips screws
-
Three 1.4 mm Phillips screws
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Use tweezers to start peeling back the tape securing the upper component cable bracket.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Slowly peel the upper component cable bracket up out of the iPad—leaving the tape pieces on the bracket to make it easier to reinstall.
-
거의 끝나갑니다!
결승점