주요 콘텐츠로 건너뛰기

소개

Prereq only.

부품

지정된 부품이 없습니다.

  1. Use the tip of a spudger to peel the tape off of the antenna cables near the logic board. Use the tip of a spudger to peel the tape off of the antenna cables near the logic board.
    • Use the tip of a spudger to peel the tape off of the antenna cables near the logic board.

  2. Use the point of a spudger to separate the adhesive holding the antennas to the right speaker. Use the point of a spudger to separate the adhesive holding the antennas to the right speaker.
    • Use the point of a spudger to separate the adhesive holding the antennas to the right speaker.

  3. Use the point of a spudger to lift the antenna cable adhesive up off the rear case. Use the point of a spudger to lift the antenna cable adhesive up off the rear case.
    • Use the point of a spudger to lift the antenna cable adhesive up off the rear case.

결론

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

회원 가입일: 2012년 10월 18일

384,462 평판

안내서 543개 작성하였습니다

iFixit iFixit 회원

Community

104 회원들

안내서 9,208개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 24