이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.
-
-
거의 끝나갑니다!
결승점