메인 콘텐츠로 스킵하기

소개

Prereq only.

부품

지정된 부품이 없습니다.

  1. Use a plastic opening tool to gently fold the front-facing camera cable upwards (roughly at a 90-degree angle), exposing the bottom side of it. Use a plastic opening tool to gently fold the front-facing camera cable upwards (roughly at a 90-degree angle), exposing the bottom side of it.
    • Use a plastic opening tool to gently fold the front-facing camera cable upwards (roughly at a 90-degree angle), exposing the bottom side of it.

  2. Use a set of tweezers to peel up the small piece of tape covering the microphone cable connector. Use a set of tweezers to peel up the small piece of tape covering the microphone cable connector.
    • Use a set of tweezers to peel up the small piece of tape covering the microphone cable connector.

  3. Use the tip of a spudger to gently lift the tab on the microphone ribbon cable's ZIF connector. Use the tip of a spudger to gently lift the tab on the microphone ribbon cable's ZIF connector.
    • Use the tip of a spudger to gently lift the tab on the microphone ribbon cable's ZIF connector.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Slide the tip of a tweezer under the microphone cable to separate it from the adhesive holding it to the headphone jack cable. Slide the tip of a tweezer under the microphone cable to separate it from the adhesive holding it to the headphone jack cable.
    • Slide the tip of a tweezer under the microphone cable to separate it from the adhesive holding it to the headphone jack cable.

  6. Use tweezers to pull the microphone cable straight out from its ZIF socket. Gently bend the microphone cable up and out of the way of the headphone jack cable. Gently bend the microphone cable up and out of the way of the headphone jack cable.
    • Use tweezers to pull the microphone cable straight out from its ZIF socket.

    • Gently bend the microphone cable up and out of the way of the headphone jack cable.

  7. Remove any tape covering the headphone jack cable connector.
    • Remove any tape covering the headphone jack cable connector.

  8. Use a plastic opening tool to fold the headphone jack cable clips outward, away from the cable, freeing the cable connector. Use a plastic opening tool to fold the headphone jack cable clips outward, away from the cable, freeing the cable connector. Use a plastic opening tool to fold the headphone jack cable clips outward, away from the cable, freeing the cable connector.
    • Use a plastic opening tool to fold the headphone jack cable clips outward, away from the cable, freeing the cable connector.

  9. Use a plastic opening tool to pry the headphone jack cable's connector up from its socket on the logic board. Use a plastic opening tool to pry the headphone jack cable's connector up from its socket on the logic board.
    • Use a plastic opening tool to pry the headphone jack cable's connector up from its socket on the logic board.

결론

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

회원 가입일: 2012년 10월 18일

374,776 평판

안내서 541개 작성하였습니다

iFixit iFixit 회원

Community

98 회원들

안내서 9,004개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 34