주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

iPad Pro 9.7" Battery Disconnect

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iPad Pro 9.7" Battery Disconnect, Disconnect the battery: 1 단계, 이미지 1/1
    • Use a Phillips screwdriver to remove the eleven 1.3 mm screws securing the EMI shield.

  2. iPad Pro 9.7" Battery Disconnect: 2 단계, 이미지 1/1
    • Apply a heated iOpener to the EMI shield on the logic board for one minute.

  3. iPad Pro 9.7" Battery Disconnect: 3 단계, 이미지 1/3 iPad Pro 9.7" Battery Disconnect: 3 단계, 이미지 2/3 iPad Pro 9.7" Battery Disconnect: 3 단계, 이미지 3/3
    • Lift the logic board EMI shield, starting at the edge nearest the top of the iPad.

    • Slowly peel the EMI shield up from the logic board.

    • This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.

    • Remove the logic board EMI shield.

  4. iPad Pro 9.7" Battery Disconnect: 4 단계, 이미지 1/1
    • Use a Phillips driver to remove the 1.7 mm-long screw securing the battery connector.

  5. iPad Pro 9.7" Battery Disconnect: 5 단계, 이미지 1/3 iPad Pro 9.7" Battery Disconnect: 5 단계, 이미지 2/3 iPad Pro 9.7" Battery Disconnect: 5 단계, 이미지 3/3
    • If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield.

    • Squeeze the sharp protrusion with a pair of pliers to flatten it.

    • Repeat the process for all sharp protrusions along the edges of the EMI shield.

결론

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

회원 가입일: 01/03/18

252,789 평판

안내서 526개 작성하였습니다

iFixit iFixit 회원

Staff

135 회원들

안내서 16,817개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 124