주요 콘텐츠로 건너뛰기

iPad Pro 9.7" Opening Display Assembly

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iPad Pro 9.7" Opening Display Assembly, Slice through the remaining adhesive: 1 단계, 이미지 1/3 iPad Pro 9.7" Opening Display Assembly, Slice through the remaining adhesive: 1 단계, 이미지 2/3 iPad Pro 9.7" Opening Display Assembly, Slice through the remaining adhesive: 1 단계, 이미지 3/3
    • Use picks to ensure most of the adhesive has been cut through on the top, left, and bottom sides.

    • Twist the top and bottom picks to separate the display assembly from the rear case.

    • Do not attempt to remove the display—it is still attached to the rear case.

  2. iPad Pro 9.7" Opening Display Assembly: 2 단계, 이미지 1/3 iPad Pro 9.7" Opening Display Assembly: 2 단계, 이미지 2/3 iPad Pro 9.7" Opening Display Assembly: 2 단계, 이미지 3/3
    • Swing the display assembly towards the right of the case, using the right edge as a hinge.

    • As you move the display assembly, make sure that the display ribbon cable is not being stressed.

    • Continue swinging the display assembly until it lays flat next to the rear case.

결론

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

회원 가입일: 01/03/18

248,442 평판

안내서 503개 작성하였습니다

iFixit iFixit 회원

Staff

136 회원들

안내서 16,573개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 75