소개

Apple has substituted the two bottom Phillips screws near the dock connector with 5-point "Pentalobular" screws.

This guide will illustrate how to replace the Pentalobe screws with good ol' regular Phillips screws.

도구

도구는 필요하지 않습니다.

Before we proceed, let's make sure you have the correct tools for the job.
  • Before we proceed, let's make sure you have the correct tools for the job.

  • iFixit's iPhone 4/4S Liberation Kit includes:

    • One 5-Point Pentalobe screwdriver

    • One #000 Phillips screwdriver

    • Two 3.6 mm "Liberation" Phillips screws

  • Are you ready to break the shackles of hardware oppression and liberate your iPhone? Let's rock!

댓글 쓰기

Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
  • Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.

댓글 쓰기

  • Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card.

  • Both the Phillips and Pentalobe screws are really small. How small? See for yourself (highlighted in the second picture).

댓글 쓰기

  • Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.

  • Huzzah! Your iPhone is now liberated from those pesky "Pentalobular" screws.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 45명이 해당 안내서를 완성하였습니다.

Andrew Bookholt

496,643 평판

안내서 619개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 6

지난 30일: 36

전체 시간: 32,132