주요 콘텐츠로 건너뛰기

iPhone 4 Verizon Dock Connector Cable Replacement

단지 전제 조건
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

필요한 것

  1. iPhone 4 Verizon Dock Connector Cable Replacement, Dock Connector Cable: 1 단계, 이미지 1/2 iPhone 4 Verizon Dock Connector Cable Replacement, Dock Connector Cable: 1 단계, 이미지 2/2
    • Remove the two 1.8 mm Phillips screws securing the dock connector cable to the logic board.

    • Remove the thin metal dock connector cable cover.

  2. iPhone 4 Verizon Dock Connector Cable Replacement: 2 단계, 이미지 1/1
    • Use the edge of a plastic opening tool to pry the dock cable up from its socket on the logic board.

  3. iPhone 4 Verizon Dock Connector Cable Replacement: 3 단계, 이미지 1/1
    • Peel the dock connector cable off the adhesive securing it to the logic board and the side of the speaker enclosure.

  4. iPhone 4 Verizon Dock Connector Cable Replacement: 4 단계, 이미지 1/2 iPhone 4 Verizon Dock Connector Cable Replacement: 4 단계, 이미지 2/2
    • Remove the 1.6 mm Phillips screw securing the pressure contact to the logic board near the vibrator.

    • Remove the pressure contact.

  5. iPhone 4 Verizon Dock Connector Cable Replacement: 5 단계, 이미지 1/2 iPhone 4 Verizon Dock Connector Cable Replacement: 5 단계, 이미지 2/2
    • Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board.

    • De-route the cellular antenna cable out from under the metal fingers attached to the logic board.

    • When reconnecting the antenna wire be VERY certain that the round connector at the end of the wire is centered on its mating half on the motherboard before applying pressure. Failure to do so will likely destroy both halves of the connector.

결론

To reassemble your device, follow these instructions in reverse order.

Andrew Bookholt

577,522 평판

안내서 618개 작성하였습니다

0 댓글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,126