주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

iPhone 4S Headphone Jack Cable Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iPhone 4S Headphone Jack Cable Assembly Replacement, Headphone Jack Cable Assembly: 1 단계, 이미지 1/3 iPhone 4S Headphone Jack Cable Assembly Replacement, Headphone Jack Cable Assembly: 1 단계, 이미지 2/3 iPhone 4S Headphone Jack Cable Assembly Replacement, Headphone Jack Cable Assembly: 1 단계, 이미지 3/3
    • In this step, be careful not to remove the headphone jack without first separating the top microphone from the upper case, as they are connected by a fragile flex cable.

    • Use a plastic opening tool to start to pry the headphone jack out of its recess in the rear case.

    • Then use the opening tool to gently peel the microphone up from the adhesive securing it to the top of the rear case.

    • Remove the headphone jack assembly from the rear case, being careful not to tear the microphone flex cable.

  2. iPhone 4S Headphone Jack Cable Assembly Replacement: 2 단계, 이미지 1/1
    • Remove the 1.6 mm Phillips screw securing the mute switch bracket to the outer case.

  3. iPhone 4S Headphone Jack Cable Assembly Replacement: 3 단계, 이미지 1/1
    • Remove the four 1.5 mm Phillips screws securing the volume button and silent switch brackets to the outer case.

  4. iPhone 4S Headphone Jack Cable Assembly Replacement: 4 단계, 이미지 1/1
    • Use a pair of tweezers to gently pull the silent switch bracket away from the outer case.

  5. iPhone 4S Headphone Jack Cable Assembly Replacement: 5 단계, 이미지 1/1
    • Carefully peel the headphone jack/volume button cables off the adhesive securing them to the rear case.

    • Remove the headphone jack cable assembly from the iPhone.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Walter Galan

694,676 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,782