소개

Just like in the iPhone 4, Apple has done their best to lock you out of your phone with two 5-point "Pentalobular" screws on either side of the dock connector.

This guide will illustrate how to replace the Pentalobe screws with good ol' regular Phillips screws. Phillips drivers are much more readily available, and the screws are less likely to strip, making all of your future repairs and modifications much easier and more accessible.

도구

도구는 필요하지 않습니다.

  1. Before we proceed, let's make sure you have the correct tools for the job.
    • Before we proceed, let's make sure you have the correct tools for the job.

    • iFixit's iPhone 4/4S Liberation Kit includes:

      • One 5-Point Pentalobe screwdriver

      • One #000 Phillips screwdriver

      • Two 3.6 mm "Liberation" Phillips screws

    • Are you ready to break the shackles of hardware oppression and liberate your iPhone? Let's rock!

    댓글 쓰기

  2. Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
    • Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card.

    • Both the Phillips and Pentalobe screws are really small. How small? See for yourself (highlighted in the second picture).

    댓글 쓰기

    • Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.

    • Huzzah! Your iPhone is now liberated from those pesky "Pentalobular" screws.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 203명이 해당 안내서를 완성하였습니다.

Andrew Optimus Goldberg

회원 가입일: 2009년 10월 17일

394,615 평판

안내서 412개 작성하였습니다

iFixit iFixit 회원

Community

113 회원들

안내서 7,342개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 14

지난 30일: 78

전체 시간: 60,231