기기를 수리하세요 커뮤니티 상점

iPhone 4S Power and Sensor Cable Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Internal prerequisite.

필요한 것

  1. iPhone 4S Power and Sensor Cable Assembly Replacement, Power and Sensor Cable Assembly: 1 단계, 이미지 1/2 iPhone 4S Power and Sensor Cable Assembly Replacement, Power and Sensor Cable Assembly: 1 단계, 이미지 2/2

    • Use the edge of a plastic opening tool to pry the earpiece speaker off the adhesive securing it to the outer case. Note that the power button cable is glued to the the case as well, and will need to be pried up.

    • Use a pair of tweezers to unfold the earpiece speaker from its recess in the outer case.

    • Be careful not to tear the cable from the earpiece speaker. They are adhered together, and the cable is very delicate.

    편집

  3. iPhone 4S Power and Sensor Cable Assembly Replacement: 2 단계, 이미지 1/2 iPhone 4S Power and Sensor Cable Assembly Replacement: 2 단계, 이미지 2/2

    • Use the edge of plastic opening tool to gently move the top sensor assembly away from the outer case.

    • Gently pry the top sensor assembly off the outer case.

    편집

  4. iPhone 4S Power and Sensor Cable Assembly Replacement: 3 단계, 이미지 1/3 iPhone 4S Power and Sensor Cable Assembly Replacement: 3 단계, 이미지 2/3 iPhone 4S Power and Sensor Cable Assembly Replacement: 3 단계, 이미지 3/3

    • Lift and remove the power and sensor cable assembly from the iPhone.

    • Be sure not to lose the small retainer clip located on the top sensor assembly.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

Walter Galan

694,644 평판

안내서 1,203개 작성하였습니다

배지: 54

배지 +51개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 862