iPhone 5 Lightning Connector and Speaker Assembly Replacement - iFixit 수리 안내서

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

소개

Internal prerequisite to remove the lightning connector and speaker assembly

필요한 것

1 단계 Lightning Connector and Speaker Assembly

iPhone 5 Lightning Connector and Speaker Assembly Replacement, Lightning Connector and Speaker Assembly: 1 단계, 이미지 1/1

Remove the following screws securing the Lightning connector and speaker enclosure assembly to the rear case:
One 2.5 mm Phillips screw
Two 3.3 mm Phillips screws
One 2.9 mm Phillips screw
Two 1.5 mm Phillips screws
One 2.8 mm Phillips screw

2 단계

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 2 단계, 이미지 1/3

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 2 단계, 이미지 2/3

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 2 단계, 이미지 3/3

Use the flat end of a spudger to gently pry the Lightning connector and speaker enclosure assembly cables up from the rear case.
Make sure you get the spudger under the large ribbon cable connected to the assembly. Prying the rest of the assembly away from the cable may result in a tear.

3 단계

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 3 단계, 이미지 1/3

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 3 단계, 이미지 2/3

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 3 단계, 이미지 3/3

Remove the Lightning connector and speaker enclosure assembly from the rear case.
Take care not to lose the small metal washer on the speaker enclosure, or the four small metal washers beneath the Lightning connector screws.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 6명과 함께

Andrew Optimus Goldheart

회원 가입일: 10/17/09

502,855 평판

안내서 407개 작성하였습니다

배지 +41개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 16,817개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,807