필요한 것
-
-
Remove three screws securing the vibrator and vibrator bracket to the rear case:
-
One 2.3 mm Phillips screw
-
One 1.7 mm Phillips screw
-
One 1.6 mm Phillips screw securing the vibrator to the top inside of the rear case.
-
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.