주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Prerequisite to remove the camera after the logic board.

부품

지정된 부품이 없습니다.

  1. Using a pair of tweezers, flip the rubber camera cover out of its clip and toward the outside of the rear case. Do not attempt to fully remove this cover. It is attached to the rear case and only needs to be flipped open, not removed. Do not attempt to fully remove this cover. It is attached to the rear case and only needs to be flipped open, not removed.
    • Using a pair of tweezers, flip the rubber camera cover out of its clip and toward the outside of the rear case.

    • Do not attempt to fully remove this cover. It is attached to the rear case and only needs to be flipped open, not removed.

  2. 필수 도구 키트

    최고의 소형 키트에서 가장 유용한 도구.

    지금 쇼핑하기

    필수 도구 키트

    최고의 소형 키트에서 가장 유용한 도구.

    지금 쇼핑하기
  3. Remove the rear-facing camera from the rear case. During reassembly, the camera cable should bend in a 'U' shape to slot in behind the logic board. If the rubber camera bumper has shifted, be sure to replace it before reassembling your iPhone.
    • Remove the rear-facing camera from the rear case.

    • During reassembly, the camera cable should bend in a 'U' shape to slot in behind the logic board.

    • If the rubber camera bumper has shifted, be sure to replace it before reassembling your iPhone.

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Sam Goldheart

회원 가입일: 2012년 10월 18일

427,722 평판

안내서 547개 작성하였습니다

iFixit iFixit 회원

Community

132 회원들

안내서 13,480개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,392