주요 콘텐츠로 건너뛰기

iPhone 6 Plus Antenna Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iPhone 6 Plus Antenna Assembly Replacement, Antenna Assembly: 1 단계, 이미지 1/1
    • Remove the following screws securing the antenna bracket to the rear case:

    • One 1.5 mm Phillips #00 screw

    • One 2.8 mm Phillips #00 screw

  2. iPhone 6 Plus Antenna Assembly Replacement: 2 단계, 이미지 1/1
    • Grasp the antenna bracket with a pair of tweezers and lift it off the iPhone.

  3. iPhone 6 Plus Antenna Assembly Replacement: 3 단계, 이미지 1/1
    • Carefully pry the antenna connector up off the logic board with a plastic opening tool.

  4. iPhone 6 Plus Antenna Assembly Replacement: 4 단계, 이미지 1/2 iPhone 6 Plus Antenna Assembly Replacement: 4 단계, 이미지 2/2
    • Grasp the antenna connector with a pair of tweezers and gently lift it from its retaining clip on the logic board.

  5. iPhone 6 Plus Antenna Assembly Replacement: 5 단계, 이미지 1/2 iPhone 6 Plus Antenna Assembly Replacement: 5 단계, 이미지 2/2
    • The two connectors may be coupled by a single adhesive tab. If this is the case, then they may detach as a pair.

    • Disconnect the power button cable and audio control cable connectors from their respective sockets on the logic board.

  6. iPhone 6 Plus Antenna Assembly Replacement: 6 단계, 이미지 1/1
    • Remove the following screws securing the top cellular antenna to the rear case:

    • One 2.8 mm Phillips #00 screw

    • Two 1.6 mm Phillips #00 screws

  7. iPhone 6 Plus Antenna Assembly Replacement: 7 단계, 이미지 1/2 iPhone 6 Plus Antenna Assembly Replacement: 7 단계, 이미지 2/2
    • Use a pair of tweezers to grasp and remove the top cellular antenna out of the iPhone.

    • During reassembly, make sure to place the small washer in the top left corner of the antenna assembly.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

693,936 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 4

전체 시간: 664