주요 콘텐츠로 건너뛰기

iPhone 6 Plus Vibrator Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iPhone 6 Plus Vibrator Replacement, Vibrator: 1 단계, 이미지 1/1
    • Pry the vibrator connector cable up from its socket on the logic board with the flat end of a spudger.

  2. iPhone 6 Plus Vibrator Replacement: 2 단계, 이미지 1/2 iPhone 6 Plus Vibrator Replacement: 2 단계, 이미지 2/2
    • Use the tip of a spudger to disconnect the interconnect antenna cable from its socket on the logic board.

  3. iPhone 6 Plus Vibrator Replacement: 3 단계, 이미지 1/2 iPhone 6 Plus Vibrator Replacement: 3 단계, 이미지 2/2
    • Grasp the interconnect antenna cable with a pair of tweezers and carefully deroute it from its channel on the speaker assembly.

  4. iPhone 6 Plus Vibrator Replacement: 4 단계, 이미지 1/1
    • Remove the two 2.5 mm Phillips #00 screws securing the vibrator to the rear case.

  5. iPhone 6 Plus Vibrator Replacement: 5 단계, 이미지 1/1
    • Lift and remove the vibrator out of the iPhone.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

694,627 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 155