주요 콘텐츠로 건너뛰기

소개

Use this guide to remove or replace the two screws securing the iPhone X's display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

  1. Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • If the screws are stripped or damaged, replace the screws.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

  2. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
결론

To reassemble your device, follow these instructions in reverse order.

다른 17명이 해당 안내서를 완성하였습니다.

Jeff Suovanen

회원 가입일: 2013년 08월 06일

242,061 평판

안내서 211개 작성하였습니다

iFixit iFixit 회원

Community

100 회원들

안내서 9,029개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 22

지난 7일: 144

지난 30일: 564

전체 시간: 9,085