기기를 수리하세요 커뮤니티 상점

iPhone XS Max Display Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Prereq-only for detaching the display assembly.

필요한 것

  1. iPhone XS Max Display Assembly Replacement, Display Assembly: 1 단계, 이미지 1/2 iPhone XS Max Display Assembly Replacement, Display Assembly: 1 단계, 이미지 2/2
    이 단계에 사용된 도구:
    Magnetic Project Mat
    $19.95
    구매

    • Remove four Y000 screws securing the logic board cover bracket, of the following lengths:

    • Two 1.1 mm screws

    • One 1.5 mm screw

    • One 3.7 mm screw

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

    번역하기

  2. iPhone XS Max Display Assembly Replacement: 2 단계, 이미지 1/1

    • Remove the bracket.

    • The bracket may be lightly adhered in place. Lift gently but firmly to separate it.

    • During reassembly, this is a good point to power on your iPhone and test all functions before you seal the display in place. Be sure to power your iPhone back down completely before you continue working.

    번역하기

  3. iPhone XS Max Display Assembly Replacement: 3 단계, 이미지 1/2 iPhone XS Max Display Assembly Replacement: 3 단계, 이미지 2/2

    • Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

    • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

    • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

    번역하기

  4. iPhone XS Max Display Assembly Replacement: 4 단계, 이미지 1/2 iPhone XS Max Display Assembly Replacement: 4 단계, 이미지 2/2

    • Remove the three Y000 screws securing the display connector bracket:

    • Two 1.1 mm screws

    • One 1.5 mm screw

    번역하기

  6. iPhone XS Max Display Assembly Replacement: 5 단계, 이미지 1/1

    • Remove the bracket.

    번역하기

  7. iPhone XS Max Display Assembly Replacement: 6 단계, 이미지 1/2 iPhone XS Max Display Assembly Replacement: 6 단계, 이미지 2/2

    • Use the point of a spudger or a fingernail to disconnect the front panel sensor assembly connector.

    번역하기

  8. iPhone XS Max Display Assembly Replacement: 7 단계, 이미지 1/2 iPhone XS Max Display Assembly Replacement: 7 단계, 이미지 2/2

    • Use a spudger or a fingernail to disconnect the OLED panel cable connector.

    • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

    번역하기

  9. iPhone XS Max Display Assembly Replacement: 8 단계, 이미지 1/2 iPhone XS Max Display Assembly Replacement: 8 단계, 이미지 2/2

    • Use a spudger or fingernail to pry the digitizer cable connector up from its socket.

    • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

    번역하기

  10. iPhone XS Max Display Assembly Replacement: 9 단계, 이미지 1/3 iPhone XS Max Display Assembly Replacement: 9 단계, 이미지 2/3 iPhone XS Max Display Assembly Replacement: 9 단계, 이미지 3/3

    • The front panel sensor assembly flex cable is lightly adhered in place.

    • Carefully lift the cable until the adhesive separates.

    번역하기

  11. iPhone XS Max Display Assembly Replacement: 10 단계, 이미지 1/1
    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Jeff Suovanen

회원 가입일: 08/06/13

428,098 평판

안내서 259개 작성하였습니다

배지: 48

배지 +45개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 16,817개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 409