iPod Shuffle 3rd Generation Logic Board Replacement - iFixit 수리 안내서

소개

Replace that faulty logic board to restore functionality to a broken iPod Shuffle.

필요한 것

1 단계 Rear Case

iPod Shuffle 3rd Generation Logic Board Replacement, Rear Case: 1 단계, 이미지 1개 중 1개

Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
Be careful when using a metal spudger, as you may scratch the outer case.

2 단계

iPod Shuffle 3rd Generation Logic Board Replacement: 2 단계, 이미지 2개 중 1개

iPod Shuffle 3rd Generation Logic Board Replacement: 2 단계, 이미지 2개 중 2개

Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

3 단계

iPod Shuffle 3rd Generation Logic Board Replacement: 3 단계, 이미지 1개 중 1개

Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.
Pry the rear case away from the front case.

4 단계

iPod Shuffle 3rd Generation Logic Board Replacement: 4 단계, 이미지 1개 중 1개

Lift the bottom of the rear case and remove it from the rest of the iPod.

5 단계 Logic Board

iPod Shuffle 3rd Generation Logic Board Replacement, Logic Board: 5 단계, 이미지 1개 중 1개

Disconnect the headphone jack and shuffle switch connector by prying it off the logic board with a spudger.

6 단계

iPod Shuffle 3rd Generation Logic Board Replacement: 6 단계, 이미지 1개 중 1개

Remove the single Phillips screw securing the logic board to the front case.

7 단계

iPod Shuffle 3rd Generation Logic Board Replacement: 7 단계, 이미지 1개 중 1개

Peel the battery up from the front case with an iPod opening tool.
Remove the logic board and battery from the iPod.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

4다른 기여자 명과 함께

Matthew Newsom

회원 가입일: 01/05/10

40,791 평판

안내서 67개를 작성함

배지 +44개 더

댓글 0개

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 29

전체 시간: 6,534