주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

iPod Shuffle 3rd Generation Logic Board Replacement

필요한 것

  1. iPod Shuffle 3rd Generation Logic Board Replacement, Rear Case: 1 단계, 이미지 1/1
    • Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.

    • Be careful when using a metal spudger, as you may scratch the outer case.

  2. iPod Shuffle 3rd Generation Logic Board Replacement: 2 단계, 이미지 1/2 iPod Shuffle 3rd Generation Logic Board Replacement: 2 단계, 이미지 2/2
    • Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

  3. iPod Shuffle 3rd Generation Logic Board Replacement: 3 단계, 이미지 1/1
    • Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.

    • Pry the rear case away from the front case.

  4. iPod Shuffle 3rd Generation Logic Board Replacement: 4 단계, 이미지 1/1
    • Lift the bottom of the rear case and remove it from the rest of the iPod.

  5. iPod Shuffle 3rd Generation Logic Board Replacement, Logic Board: 5 단계, 이미지 1/1
    • Disconnect the headphone jack and shuffle switch connector by prying it off the logic board with a spudger.

  6. iPod Shuffle 3rd Generation Logic Board Replacement: 6 단계, 이미지 1/1
    • Remove the single Phillips screw securing the logic board to the front case.

  7. iPod Shuffle 3rd Generation Logic Board Replacement: 7 단계, 이미지 1/1
    • Peel the battery up from the front case with an iPod opening tool.

    • Remove the logic board and battery from the iPod.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Matthew Newsom

회원 가입일: 01/05/10

39,452 평판

안내서 67개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 10

전체 시간: 6,405