주요 콘텐츠로 건너뛰기

iPod Touch 2nd Generation Power/Volume Controls Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. iPod Touch 2nd Generation Power/Volume Controls Replacement, Power/Volume Controls: 1 단계, 이미지 1/1
    • Remove the two Phillips screws securing the power/volume controls to the rear panel.

  2. iPod Touch 2nd Generation Power/Volume Controls Replacement: 2 단계, 이미지 1/1
    • Use the tip of a spudger to remove the yellow kapton tape covering the power/volume control ribbon cable.

  3. iPod Touch 2nd Generation Power/Volume Controls Replacement: 3 단계, 이미지 1/1
    • Remove the two Phillips screws securing the power/volume controls to the rear panel.

    • Lift the power/volume controls out of the rear panel.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

693,685 평판

안내서 1,203개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,522