필요한 것
-
-
Using a Philips head #00 screwdriver locate and remove each of the four screws located along the tall side of the iRulu.
-
-
-
이 단계에 사용된 도구:Desoldering Pump$3.99
-
Insert the new speaker heads where the old speakers were previously.
-
Now use the soldering iron to solder the leads of the two speakers onto the logic board.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.