소개
The front shell of the iRobot Braava Jet 240 covers all of the device’s circuitry as well as the nozzle. Therefore, to replace the nozzle, the front shell must first be removed. Follow this guide to remove the front shell.
필요한 것
-
-
-
Remove the two 22.0 mm screws on the bottom-front of the robot using a Phillips #1 screwdriver.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.