소개

This is an easy guide. It should only take a few minutes to complete and it doesn't require any tools.

도구

도구는 필요하지 않습니다.

부품

부품은 필요하지 않습니다.

  1. Lay the Roomba upside down on a flat surface with the blue strip away from you.
    • Lay the Roomba upside down on a flat surface with the blue strip away from you.

    댓글 쓰기

  2. Use your index fingers to pull the yellow tabs towards you.
    • Use your index fingers to pull the yellow tabs towards you.

    • While still pulling the yellow tabs with your index fingers, tilt up the brush guard.

    • For reassembly, make sure to push in the brush guard until it clicks into place.

    댓글 쓰기

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Pull back the brush guard to unhook it from the latches.

    • Remove the brush guard by lifting it up and out of the Roomba.

    • This picture has a change in orientation to illustrate the latches. Continue disassembling the Roomba with the blue strip away from you.

    댓글 쓰기

    • Set the brush guard aside.

    • The main brush is the bristly one that is closest to the blue strip.

    댓글 쓰기

    • Remove the main brush by grabbing it and pulling it up and out of the Roomba.

    • For reassembly, orient the Roomba with the battery closest to you:

      • First, insert the black end of the main brush into the black square opening on the right side.

      • Second, lay the main brush back into place.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Samantha Barrett

회원 가입일: 2014년 01월 13일

501 평판

안내서 5개 작성하였습니다

Cal Poly, Team 17-5, Forte Winter 2014 Cal Poly, Team 17-5, Forte Winter 2014 회원

CPSU-FORTE-W14S17G5

5 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 1

지난 30일: 2

전체 시간: 400