기기를 수리하세요 커뮤니티 상점

iRobot Roomba 675 Brush Replacement

소개

If the brushes on your Roomba get stuck or aren’t spinning, you may need to replace them. Follow these steps to replace the brush assembly in your iRobot Roomba 675.

  1. iRobot Roomba 675 Brush Replacement, iRobot Roomba 675 Brush Replacement: 1 단계, 이미지 1/1

    • Flip the device over to expose the bottom of the device. Using your hands, press on the two yellow tabs to expose the brush assembly.

    편집

  3. iRobot Roomba 675 Brush Replacement: 2 단계, 이미지 1/1

    • Grab the bushes on the side and push to the right and pull up in order to take out the brushes.

    편집

  4. iRobot Roomba 675 Brush Replacement: 3 단계, 이미지 1/1

    • From here on out you can clean the brushes and refollow the instructions backwards in order to reinstall the brushes again.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Jorge Baquier

회원 가입일: 02/13/20

97 평판

안내서 1개 작성함

배지: 2

팀

University of North Texas, Team S1-G5, Thomas Spring 2020 University of North Texas, Team S1-G5, Thomas Spring 2020 회원

UNT-THOMAS-S20S1G5

3 회원들

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 4

7일 전: 7

30일 전: 20

전체 시간: 1,218