iRobot Roomba 690 Spinning Brush Replacement - iFixit 수리 안내서

소개

The spinning brush on the iRobot Roomba 690 is used to help sweep debris towards the roller brushes. Over time, it may need to be replaced or cleaned. This guide will explain how to replace the spinning brush. Removing the spinning brush is required when accessing components of the Roomba concealed inside the protective bottom cover, and as such performing these steps will be required to complete other guides.

필요한 것

1 단계 Spinning Brush

iRobot Roomba 690 Spinning Brush Replacement, Spinning Brush: 1 단계, 이미지 1/1

Place the Roomba upside down so that the wheels and brushes are facing upward.

2 단계

iRobot Roomba 690 Spinning Brush Replacement: 2 단계, 이미지 1/3

iRobot Roomba 690 Spinning Brush Replacement: 2 단계, 이미지 2/3

iRobot Roomba 690 Spinning Brush Replacement: 2 단계, 이미지 3/3

Loosen the captive screw in the spinning brush using a Phillips #0 screwdriver.
Remove the spinning brush from the vacuum.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

John Galvin

회원 가입일: 03/23/22

584 평판

안내서 5개 작성하였습니다

배지 +3개 더

팀

UMass Dartmouth, Team 1-1, Botvin Spring 2022 UMass Dartmouth, Team 1-1, Botvin Spring 2022 회원

UMASSD-BOTVIN-S22S1G1

3 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 2

7일 전: 2

30일 전: 6

전체 시간: 152