iRobot Roomba 980 Rear Wheels - iFixit 수리 안내서

소개

The rear wheel assembly is what propels the roomba. If they become damaged the roomba will begin to move irregularly or not at all.

필요한 것

1 단계 Battery

iRobot Roomba 980 Rear Wheels, Battery: 1 단계, 이미지 1/1

Flip over the device and remove the two 11.5 mm screws using the Phillips #1 screwdriver.

2 단계

iRobot Roomba 980 Rear Wheels: 2 단계, 이미지 1/2

iRobot Roomba 980 Rear Wheels: 2 단계, 이미지 2/2

Unscrew the back plate using a Phillips #1 screwdriver.
Carefully lift the panel up once the screws are removed.

3 단계

iRobot Roomba 980 Rear Wheels: 3 단계, 이미지 1/2

iRobot Roomba 980 Rear Wheels: 3 단계, 이미지 2/2

With both hands, grab the two black tabs on each end of the battery.
Pull the tabs upwards to remove the battery.

4 단계 Rear Wheels

iRobot Roomba 980 Rear Wheels, Rear Wheels: 4 단계, 이미지 1/2

iRobot Roomba 980 Rear Wheels, Rear Wheels: 4 단계, 이미지 2/2

Loosen the screw on the side brush.
Lift the side brush from the device.

5 단계

iRobot Roomba 980 Rear Wheels: 5 단계, 이미지 1/2

iRobot Roomba 980 Rear Wheels: 5 단계, 이미지 2/2

Unscrew the (2) 11.5mm screws using the Phillips #1 screwdriver.
Carefully remove the plate by lifting it off of the device.

6 단계

iRobot Roomba 980 Rear Wheels: 6 단계, 이미지 1/2

iRobot Roomba 980 Rear Wheels: 6 단계, 이미지 2/2

Removing the brush module may ease the removal of the wheel module
Locate the (3) 15.8mm gold Phillips #1 screws and unscrew them.
Lift the wheel module removing it from the vacuum.
Remove the other wheel by repeating these steps.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Ernesto Rodriguez Romero

회원 가입일: 09/27/17

965 평판

안내서 4개 작성하였습니다

배지 +9개 더

팀

USF Tampa, Team S14-G2, Boczar Fall 2017 USF Tampa, Team S14-G2, Boczar Fall 2017 회원

USFT-BOCZAR-F17S14G2

4 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 11

전체 시간: 3,147