기기를 수리하세요 커뮤니티 상점

iRobot Roomba e5 Caster Wheel Replacement

소개

This guide will show you how to access the caster wheel on the iRobot Roomba e5 so that it can be cleaned or replaced. Most of the time this wheel only needs to be cleaned. Debris may get caught not allowing the wheel to rotate. Often, hair gets caught in the wheel.

필요한 것

  1. iRobot Roomba e5 Caster Wheel Replacement, Caster Wheel: 1 단계, 이미지 1/2 iRobot Roomba e5 Caster Wheel Replacement, Caster Wheel: 1 단계, 이미지 2/2

    • Use an opening tool to pry beneath the grey ring on each side of the wheel until it pops out.

    편집

  2. iRobot Roomba e5 Caster Wheel Replacement: 2 단계, 이미지 1/2 iRobot Roomba e5 Caster Wheel Replacement: 2 단계, 이미지 2/2

    • Pull the wheel out of the vacuum.

    • Dirt and debris can be caught under the wheel and may lead to decreased mobility. Try cleaning out the debris before replacing the wheel.

    편집

  4. iRobot Roomba e5 Caster Wheel Replacement: 3 단계, 이미지 1/3 iRobot Roomba e5 Caster Wheel Replacement: 3 단계, 이미지 2/3 iRobot Roomba e5 Caster Wheel Replacement: 3 단계, 이미지 3/3

    • Remove two 10 mm screws from the wheel housing using a Phillips #1 screwdriver.

    편집

  5. iRobot Roomba e5 Caster Wheel Replacement: 4 단계, 이미지 1/1

    • Pull the wheel housing out of the vacuum.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Kyle Christensen

회원 가입일: 03/29/22

405 평판

안내서 3개 작성하였습니다

배지: 9

배지 +6개 더

팀

Casper College, Team 1-2, Lareau Spring 2022 Casper College, Team 1-2, Lareau Spring 2022 회원

CASC-LAREAU-S22S1G2

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 5

전체 시간: 317