주요 콘텐츠로 건너뛰기

plantronics Voyager pro Battery Replacement

필요한 것

동영상 개요

  1. plantronics Voyager pro Battery Replacement, Battery: 1 단계, 이미지 1/1
    • order your battery

  2. plantronics Voyager pro Battery Replacement: 2 단계, 이미지 1/1
    • separate rubber case from back of earpiece. you don't need to remove it completely like I did.

  3. plantronics Voyager pro Battery Replacement: 3 단계, 이미지 1/1
    • rotate the back away from the case. its basically glued in place with no other fasteners

  4. plantronics Voyager pro Battery Replacement: 4 단계, 이미지 1/1
    • you will need to slowly cut through the foam to separate the wires from the battery. then use a soldering iron to desolder the old battery from the board these connections go through the entire board.

  5. plantronics Voyager pro Battery Replacement: 5 단계, 이미지 1/1
    • solder the new battery in and test the charging before reassembly.

    • the new battery I ordered was slightly larger but it fit with no problems. I found the wires inside this device to be fairly robust and did not have any issues with wires breaking or dislodging.

    • When I re-assembled I used small amounts of gorilla glue for both the case and the rubber cover. it worked very well and has worked well since. for more details I put together a short video you can check out.

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Dan Dunham

회원 가입일: 04/15/17

3,327 평판

안내서 29개 작성하였습니다

댓글 한 개

I accomplished this battery replacement. I was successful. However in my opinion, this device was not meant to have this repair done. It is a “fiddley” affair, but possible. I think it took me two hours, at my leisure. Probably better off replacing the device. Unless…. your just that type who enjoys fiddling around.

Leslie Womelsdorff - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 17

30일 전: 65

전체 시간: 4,507