소개

The speaker is located inside the phone underneath the front cover. A T6 screwdriver is needed to access the speaker.

부품

부품은 필요하지 않습니다.

  1. Press down the button on the back panel.
    • Press down the button on the back panel.

    댓글 쓰기

  2. Push the back cover upwards.
    • Push the back cover upwards.

    댓글 쓰기

    • Remove the back cover from the phone.

    댓글 쓰기

    • Press the silver button on the top of the phone.

    댓글 쓰기

    • Slide your thumbnail down the case seam to separate the rest of the case.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Gently, remove the case.

    • Careful! Do not bend the plastic tabs.

    댓글 쓰기

    • Using a T6 Torx Screwdriver, unscrew and remove the six screws shown in the picture.

    댓글 쓰기

    • Remove the panel that covers the motherboard.

    • If replacing the speaker, stop at this step and skip forward to the first step of the speaker guide.

    댓글 쓰기

    • Remove the LCD screen frame.

    댓글 쓰기

    • Remove the motherboard.

    댓글 쓰기

    • Locate the speaker on the back of the removed panel.

    댓글 쓰기

    • Use nails to gently lift the speaker up; speaker may be slightly glued to the panel.

    댓글 쓰기

    • When the speaker is loose, gently lift the speaker out of the panel.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Job Jao

회원 가입일: 2010년 10월 08일

37 평판

안내서 2개 작성하였습니다

Cal Poly, Team 3-27, Regan Fall 2010 Cal Poly, Team 3-27, Regan Fall 2010 회원

CPSU-REGAN-F10S3G27

4 회원들

안내서 9개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 3

전체 시간: 2,515