주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 24개에 영향을 미칩니다.

2 단계
Apply a suction cup to the lower half of the front panel, just above the home button. Be sure the suction cup does not overlap with the home button, as this will prevent a seal from forming between the suction cup and front glass.
Separate the display
  • Apply a suction cup to the lower half of the front panel, just above the home button.

  • Be sure the suction cup does not overlap with the home button, as this will prevent a seal from forming between the suction cup and front glass.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

将吸盘放在前面板的下半部分,刚好放在home按键的上方。

确保吸盘不会与home按键重叠,因为这将导致吸盘和前面板玻璃之间不能形成密封。

如果你的屏幕已经严重破碎,可先在屏幕上粘上一层透明宽胶带,使吸盘能顺利吸附在显示屏上。你也可以直接选用粘附力极强的胶带,来替代吸盘。如果以上两种办法都不行,你还可以在吸盘上涂上强力胶,使吸盘粘在碎屏上。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.