주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

영어
스페인어
2 단계
Apply a suction cup to the lower half  of the front panel, just above the home button. Be sure the suction cup does not overlap with the home button, as this will prevent a seal from forming between the suction cup and front glass.
  • Apply a suction cup to the lower half of the front panel, just above the home button.

  • Be sure the suction cup does not overlap with the home button, as this will prevent a seal from forming between the suction cup and front glass.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

Aplica una ventosa a mitad inferior del panel frontal. justo por arriba del botón de inicio.

Asegúrate que la ventosa no se superponga con el botón de inicio ya que esto impedirá que se forme un sello entre la ventosa y el cristal frontal.

Si tu pantalla está muy rota, cubrirla con una capa de cinta adhesiva transparente puede permitir que la ventosa se adhiera. Alternativamente, se puede usar cinta muy fuerte en lugar de la ventosa. Si todo lo demás falla, puedes pegar con superglue la ventosa a la pantalla rota.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.