주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

영어
프랑스어
2 단계
Apply a suction cup to the lower half  of the front panel, just above the home button. Be sure the suction cup does not overlap with the home button, as this will prevent a seal from forming between the suction cup and front glass.
  • Apply a suction cup to the lower half of the front panel, just above the home button.

  • Be sure the suction cup does not overlap with the home button, as this will prevent a seal from forming between the suction cup and front glass.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

Posez une ventouse sur la partie inférieure de l'écran, juste au-dessus du bouton home.

Assurez-vous de ne pas poser la ventouse sur le bouton home, car cela empêcherait la ventouse d'adhérer de façon étanche à la vitre.

Si votre écran est méchamment fissuré, le couvrir de ruban adhésif transparent pourra aider la ventouse à adhérer. Sinon, une bande à fort pouvoir adhésif peut être utilisée à la place de la ventouse. Si rien ne fonctionne, vous pouvez coller la ventouse à la superglue sur l'écran cassé.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.