주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
스페인어
3 단계
Pry under the left edge of the home button cable connector to disconnect it from its socket. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.
  • Pry under the left edge of the home button cable connector to disconnect it from its socket.

  • If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Haz palanca por debajo del borde izquierdo del conector de cable de botón de inicio para desconectarlo de su zócalo.

Si el conector completo comienza a darse vuelta sin separarse, presiona el cable en el borde superior del conector con la parte plana de tu spudger, mientras simultáneamente levantas el borde izquierdo del conector. Ten mucho cuidado de no dañar el cable o conector o el sensor se inutilizará de manera permanente.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.