주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
네덜란드어
3 단계
Pry under the left edge of the home button cable connector to disconnect it from its socket. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.
  • Pry under the left edge of the home button cable connector to disconnect it from its socket.

  • If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Wrik onder de linkerkant van de kabelaansluiting van de thuisknop om deze uit het contact los te koppelen.

Als de gehele aansluiting omhoog begint te komen zonder los te komen, duw dan, met de platte kant van je spudger, op de kabel aan de bovenkant van de connector, terwijl je aan de linkerkant van de aansluiting blijft wrikken. Wees wel voorzichtig dat je de kabel of aansluiting niet beschadigt, aangezien dat permanente schade aan de sensor oplevert.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.