주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

4 단계
Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.
  • Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.

  • Flip the display assembly over. Use a hairdryer or prepare an iOpener and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.

  • Don't overheat the display. It should be slightly too hot to touch comfortably.

Das empfindliche Kabel des Sensors ist verklebt. Es ist hilfreich den Bereich rund um den Sensor zu erwärmen, um den Kleber aufzuweichen.

Drehe die Displayeinheit herum. Benutze einen Haartrockner oder erwärme einen iOpener, um die untere Kante des Displays für 90 Sekunden zu erwärmen. So wird der Kleber darunter weich.

Erhitze das Display nicht zu stark. Es sollte etwas zu heiss sein, um es bequem anfassen zu können.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.