주요 콘텐츠로 건너뛰기

ラップトップ用バッテリーのキャリブレーション-HP機向け注記あり

2 단계
Recalibrating laptop batteries - READ FOR HP MACHINES, Use your laptop: 0 단계, 이미지 3개 중 1개 Recalibrating laptop batteries - READ FOR HP MACHINES, Use your laptop: 0 단계, 이미지 3개 중 2개 Recalibrating laptop batteries - READ FOR HP MACHINES, Use your laptop: 0 단계, 이미지 3개 중 3개
Use your laptop
  • Any data from this step will be lost. Only plug the laptop in to get the machine started from a BIOS lockout.

  • If you are using a Windows laptop, make sure you turn the laptop back on after the initial shutdown. Windows is designed to shut down when the battery in the laptop reports ~3% remaining capacity. This may require brief use of the power adapter if the laptop does not turn on until the charge is higher or it has AC power.

  • Use your laptop while it is discharging. You will want to do this until the computer shuts down, and if you are using Windows turn it on again until the laptop no longer turns on; this ensures a full discharge.

この手順で得たデータはすべて失われます。デバイスを起動させるためにノートパソコンを接続するのは、BIOSロックアウトからです。

Windowsのノートパソコンをお使いの場合は、最初のシャットダウン後にノートパソコンの電源を入れ直してください。Windowsは、ノートパソコンのバッテリーの残量が3%程度になるとシャットダウンするように設計されています。このため、充電量が増えるかAC電源が入るまでノートパソコンの電源が入らない場合は、電源アダプターを短時間使用する必要があります。

放電しながらノートパソコンを使用してください。コンピュータがシャットダウンするまでこれを行い、Windowsを使用している場合は、ラップトップの電源が入らなくなるまで再度電源を入れます。こうすることで、完全放電しているか確認できます。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.