주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Remove five Y000 screws securing the logic board connector bracket, of the following lengths:
  • Remove five Y000 screws securing the logic board connector bracket, of the following lengths:

  • Three 1.1 mm screws

  • One 3.1 mm screw

  • One 3.7 mm screw

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

Entferne die fünf Y000 Schrauben, welche die Halterung des Verbinders des Logic Board befestigen:

Drei 1,1 mm Schrauben

Eine 3,1 mm Schraube

Eine 3,7 mm Schraube

Achte bei dieser Reparatur auf jede Schraube und stelle sicher, dass jede Schraube wieder genau an ihren alten Platz eingedreht wird. Vermeide damit, dass das Smartphone beschädigt wird.

[* black] Remove the fivefive Y000 screws securing the logic board connector bracketbracket, of the following lengths:
[* black] Remove the fivefive Y000 screws securing the logic board connector bracketbracket, of the following lengths:
[* red] Three 1.1 mm screws
[* orange] One 3.1 mm screw
[* yellow] One 3.7 mm screw
[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your iPhone.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.