주요 콘텐츠로 건너뛰기
영어
스페인어

5 단계 번역 중

5 단계
On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips head #2 bit (labeled PH2 in the Pro Tech Toolkit). Pry up at the location marked, and remove the plastic end cap. The white plastic section houses the USB micro B, and must be replaced as a whole.
  • On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips head #2 bit (labeled PH2 in the Pro Tech Toolkit).

  • Pry up at the location marked, and remove the plastic end cap.

  • The white plastic section houses the USB micro B, and must be replaced as a whole.

En la parte inferior, desatornille los cuatro tornillos Phillips Head # 2 de 15 mm, utilizando el cabezal Phillips # 2 (etiquetado como PH2 en Pro Tech Toolkit).

Haga palanca en el lugar marcado y retire la tapa de plástico.

La sección de plástico blanco aloja el micro B USB y debe reemplazarse en su totalidad.

[* red] On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips head #2 bit (labeled PH2 in the Pro Tech Toolkit).
[* orange] Pry up at the location marked, and remove the plastic end cap.
-[* black] The white plastic section houses the USB micro B, and must be replaced as a whole.
+[* icon_note] The white plastic section houses the USB micro B, and must be replaced as a whole.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.