주요 콘텐츠로 건너뛰기

Joy-Conのバックルロックの交換

5 단계
Joy-Con Buckle Lock Replacement, Remove the back panel: 0 단계, 이미지 2개 중 1개 Joy-Con Buckle Lock Replacement, Remove the back panel: 0 단계, 이미지 2개 중 2개
Remove the back panel
  • Pull the back panel straight off of the charging rail to remove it.

  • There's a chance the rail unlock button will fall out of the back panel. During reassembly, make sure it is installed correctly, with the tab on the button slotted into the notch in the back panel.

バックパネルを充電レールからまっすぐ引き抜いて外します。

バックパネルからレールロック解除ボタンが脱落する可能性があります。再組み立ての際には、ボタンのつまみがバックパネルの切り欠きにはまるように、 正しく取り付けられていることを確認してください。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.