주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 10개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive. Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in. If the adhesive is hard to cut, use an iOpener to loosen it.
  • Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive.

  • Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in.

  • If the adhesive is hard to cut, use an iOpener to loosen it.

Setze die Spitze eines Opening Picks zwischen die Rückabdeckung und den Mittelrahmen ein und ziehe es ein mal rundherum, um den Kleber zu lösen.

Es ist hilfreich, einen Saugheber zu benutzen, um die Rückabdeckung anzuheben, und so einen Spalt zu erzeugen, in den das Plektrum eingesetzt werden kann.

Sollte der Kleber zu hart sein, verwende einen iOpener, um ihn weich zu machen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.