주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 10개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive. Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in. If the adhesive is hard to cut, use an iOpener to loosen it.
  • Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive.

  • Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in.

  • If the adhesive is hard to cut, use an iOpener to loosen it.

開口ピックの先端をバックカバーとミッドフレームの間に差し込み、スマートフォン周辺にスライドして接着剤を切断します。

吸盤ハンドルを使って、バックカバーを持ち上げると、開口ピックを差し込むきっかけを作れます。

接着剤を切断しにくい場合は、緩めるために、iOpenerを使用してください

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.